Keywords
"cooling" mode
bismuth
E-AlMgSi (Aldrey) aluminum alloy
enthalpy
entropy
Gibbs energy.
heat capacity
heat conductivity
Abstract
The economic feasibility of using aluminum as a conductive material is explained by the favorable ratio of its cost to the cost of copper. In addition, one should take into account that the cost of aluminum has remained virtually unchanged for many years.
References
1.
Usov V.V., Zaimovsky A.S. Provodnikovye, reostatnye i kontaktnye materialy. Materialy i splavy v elektrotekhnike [Conductor, rheostat and contact materials. Materials and alloys in electrical engineering]. Vol. 2. Moscow; Leningrad: Gosenergoizdat, 1957: 184. (In Russ.)
2.
Alyuminievye splavy: svoistva, obrabotka, primenenie [Aluminum alloys: properties, processing, application]. Moscow: Metallurgy, 1979: 679. (In Russ.)
3.
Alieva S.G., Altman M.B., Ambartsumyan S.M. et al. Promyshlennye alyuminievye splavy: Spravochnik [Industrial aluminum alloys: Handbook]. Moscow: Metallurgy, 1984: 528. (In Russ.)
4.
Beleskiy V.M., Krivov G.A. Alyuminievye splavy (Sostav, svoistva, tekhnologiya, primenenie) [Aluminum alloys (Composition, properties, technology, application)]. Kiev: KOMITEKh, 2005: 365. (In Russ.)
5.
CHLISTOVSKY R., HEFFERNAN P., DUQUESNAY D.
International Journal of Fatigue,
2007
6.
Luts A.R., Suslina A.A. Alyuminii i ego splavy [Aluminum and its alloys]. Samara: Samara State Technical University, 2013: 81. (In Russ.)
7.
Berdiev A.E., Ganiev I.N., Niyozov H.H., Obidov F.U., Ismoilov R.A.
Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering,
2015
8.
Temperature dependence of the specific heat and thermodynamic functions AК1М2 alloy, doped strontium
Ganiev I.N., Otajonov S.E., Ibrohimov N.F., Mahmudov M.
Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering,
2019
9.
Niezov Kh.Kh., Ganiev I.N., Berdiev A.E. Splavy osobochistogo alyuminiya s redkozemel’nymi metallami [Alloys high purity aluminium with rare-earth metals]. Dushanbe: Sarmad kompaniya, 2017: 146. (In Russ.)
10.
Ganiev I.N., Aliev F.A., Odinazoda H.O., Safarov A.M., Jayloev J.H.
Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering,
2020
11.
Ganiev I.N., Nazarova M.T., Kurbonova M.Z., Yakubov U.S.
Bulletin of the Saint Petersburg State Institute of Technology (Technical University),
2019
12.
Ganiev I.N., Safarov A.G., Odinaev F.R., Yakubov U.S., Kabutov K.
Russian Journal of Non-Ferrous Metals,
2019
13.
Ganiev I.N., Mulloeva N.M., Nizomov Z., Obidov F.U., Ibragimov N.F.
High Temperature,
2014
14.
Ganiev I.N. Yakubov U.Sh., Sangov M.M., Safarov A.G. Calcium influence upon the temperature dependence of specific heat capacity and on changes in the thermodynamic functions of aluminum alloy AlFe5S10. Vestnik tekhnologicheskogo universiteta = Bulletin of the Technological University, 2018; 21(8): 11–15. (In Russ.)
15.
Niyozov O.H., Ganiev I.N., Safarov A.G., Mulloeva N.M., Yakubov U.Sh. The temperature dependence of calorific capacity and thermodynamic function changes for the composition of lead-antimony-3 alloy and calcium. Bulletin of the South Ural State University. Series Metallurgy, 2019; 19(3): 33–43. (In Russ.).
16.
Maltsev M.V. Modifikatory struktury metallov i splavov [Modifiers of the structure of metals and alloys]. Moscow: Metallurgiya, 1964: 238. (In Russ.)
17.
Vahobov A.V., Ganiev I.N. Strontium – the effective modifier of silumin. Liteinoe proizvodstvo = Foundry. Technologies and Equipment, 2000; (5): 28–29. (In Russ.)
18.
Kargapolova T.B., Makhmadulloev H.A., Ganiev I.N., Khakdodov M.M. Barium: a new inoculant for silumins. Liteinoe proizvodstvo = Foundry. Technologies and Equipment, 2001; (10): 6–9. (In Russ.)